Very simple dash. The only thing left to add is the Garmin handheld GPS ($138) it gives
me a compass, airspeed, altimeter and navigation to get to the nearest gas station.
Above on the right are the rudder and elevator parts. I used hollowed out and threaded
aluminum plugs and riveted them to the tubing, then you put a bolt thru them and they are done.
Best of all there are no gussets to cut. Someday I will put up aprint for that too.
Carving the foam with a belt sander. The easiest way I know of.
Here is the elevator control cable.
I had to rebuild my engine.
Using "Great Stuff " can foam makes a mess but it is easy to use to add foam.